The discussion forum for the SJTAG Initiative Group

Why do we need a standard for SJTAG?

Post questions that you'd like answered or debated here.
User avatar
Ian McIntosh
SJTAG Chair
Posts: 334
Joined: Mon Nov 05, 2007 11:49 pm
Location: Leonardo MW Ltd, UK
Contact:

Why do we need a standard for SJTAG?

Postby Ian McIntosh » Sat Apr 05, 2008 10:30 pm

I'm sure this is a question that many people outside of our group might ask: Most of us (end users) have already achieved some kind of system implementation of JTAG with what already exists, so what benefits would a standard offer?

I see two issues that a standard would help address:
  1. Portability. If a system design includes a third-party OEM module, then JTAG cannot be effectively applied to the system if the pertinent JTAG data for the module is not portable from the OEM vendor to the system builder.
  2. Tool support. Existing JTAG tooling provides support for some architectural features and devices that might be employed in a system JTAG design, but it is not comprehensive, meaning that designers need to be cogniscent of the tooling limitations. A standard, if it provides architectural guidelines, would help tool vendors to provide more focussed support, and allow designers to work reasonably safe in the knowledge that the design can be tested whatever test platform may be used.
Any comment on these or any other suggestions?

Return to “SJTAG Questions”

Who is online

Users browsing this forum: No registered users and 1 guest